OctoWS2811 Adapter for Teensy (Controller for Neopixels/WS2811 LEDs)


  • €13,50
Verot sisältyvät hintaan Toimituskulut lisätään kassalla.

Vain 8 jäljellä!

This adaptor board connects a Teensy 3.2 (3.5 and 3.6 are also compatible) board to thousands of LEDs using the OctoWS2811 Library.

The adaptor features a 74HCT245 buffer chip and 100 ohm impedance matching resistors. CAT6 Ethernet cable is used from this board to the LED strips. CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high quality signal. The RJ-45 network jacks allow your LED array to be easily disconnected from the electronics.

Four self-threading screws are supplied with the OctoWS2811 Adaptor board.

Teensy 3.x is added on top of the adaptor using stacking header pins, or a header and socket pair if you wish to be able to remove the Teensy 3.x board.

This adaptor can also be used with the larger Teensy 3.5 and 3.6 boards using double insulator pins and sockets. Together, these are tall enough to allow the longer board with SD socket to overhang the RJ-45 connectors.


  • Four self-threading screws
  • Eight LED outputs
  • Dimensions: 56mm x 34mm x 2mm / 2.2" x 1.3" x .08"
  • Height with Ethernet Outlets: 15mm / 0.6"
  • Weight: 11.1g

Links & Documents

Suosittelemme myös