4-channel I2C-safe Bi-directional Logic Level Converter - BSS138 Image

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Adafruit

ADA-757
  • €5,00
Verot sisältyvät hintaan Toimituskulut lisätään kassalla.

Vain 7 jäljellä!

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. 

We do have the fancy bi-directional TXB0108 in store. However, it is not very happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note. 

This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer. 

While it is designed for use with I2C, this works great for SPI, TTL Serial, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

Links & Documents
  • Test One
  • Test Two

Suosittelemme myös