Polymer Lithium Ion Battery - 110mAh Image

Polymer Lithium Ion Battery - 110mAh

Sparkfun

PRT-00731
  • €7,00
Verot sisältyvät hintaan Toimituskulut lisätään kassalla.

Vain 0 jäljellä!
Saamme lisää jälkeen

This is a very small, extremely light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 110mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins. These batteries require special charging. Do not attempt to charge these with anything but a specialized Lithium Polymer charger. Only use a charger that has been set to 100 mA charging rate. The Adafruit LiPo charger we sell, is great with this product. 

Battery includes built-in protection against over voltage, over current, and minimum voltage. Please use caution when using this battery in wearable projects. When using conductive thread, a short in the thread can create sparks and heat. We recommend using coin cell batteries for beginners.

Note: Be careful with the JST connectors. They can stick in pretty good and tugging on them can damage the connector. Check this tutorial for an easy way to remove them safely.

Dimensions: 5.7x12x28mm

Weight: 2.65g

Features:

  • Excellent long-term self-discharge rates (<8% per month)
  • Robust power source under extreme conditions (-25 to 60C)

Documents:

  • Datasheet (The datasheet is incorrect, these are not limited to a 2C discharge and the dimensions are wrong)
  • JST Connector
  • Digikey 455-1734-1-ND (Top Entry)
  • Digikey 455-1749-1-ND (Side Entry)
  • MSDS

Suosittelemme myös