Makeblock Starter Robot Kit – Bluetooth

Makeblock

MB-90020
  • €149,00
Verot sisältyvät hintaan Toimituskulut lisätään kassalla.

Vain 0 jäljellä!
Saamme lisää jälkeen

The Starter Robot kit from Makeblock is a great educational robotics kit that allows you to get into the world of robotics, electronics, and mechanics. The kit comes with various mechanical parts and electronic modules that you can use to build your own robot. 

What Can You Build With the Kit?

The kit comes with an instruction manual (in English) that shows you how to build a Robot Tank or a Three-Wheeled Robot Car. Check out the Makeblock website for more ideas. You can also just use your imagination and build whatever you like.

Controlling and Programming the Robot

The kit comes with a Bluetooth module that allows you to connect to it with a smartphone, tablet or a computer. There is an official Makeblock app available that you can use to control the robot. You can also use Scratch or Arduino IDE to program and control the robot.

Electronics

The Starter Robot Kit comes with a Me Orion, an Arduino compatible microcontroller from Makeblock. It has some handy features that allow you to easily build your circuits. You also get an ultrasonic sensor, a Bluetooth module (dual-mode), two DC motors, and all the necessary wires to connect the parts together.

No soldering required. All the parts snap together with the provided connectors and cables.

Parts List 

  • 1 × Me Orion (based on Arduino UNO)
  • 1 × Me Ultrasonic Sensor 3.0
  • 1 × Me Bluetooth Module (Dual Mode)
  • 2 × DC Motor-25 6V/185RPM
  • 1 × 6P6C RJ25 cable-20cm
  • 1 × 6P6C RJ25 cable-35cm
  • 1 × USB 2.0 A-Male to Micro B-Male Cable
  • 1 × Battery Holder for (6)AA
  • 1 × Beam 0824-96
  • 1 × Beam 0824-128
  • 2 × Beam 0824-144
  • 2 × Threaded Shaft 4x39mm
  • 2 × Shaft Collar 4mm
  • 2 × Shaft Connector 4mm
  • 4 × Flange Bearing 4x8x3mm
  • 4 × Plastic Ring 4x7x2mm
  • 4 × Plastic Rivet R4060
  • 4 × Plastic Rivet R4120
  • 38 × Track
  • 38 × Track Axle
  • 4 × Timing Pulley 90T
  • 2 × Tyre 68.5x22mm
  • 6 × Nylon Stud M4*30
  • 1 × Caster Wheel
  • 1 × Plate 3x6
  • 1 × Bracket 3x3
  • 1 × Bracket P3
  • 2 × Base Bracket B
  • 2 × DC Motor-25 Bracket B
  • 1 × HEX Screwdriver 2.5mm
  • 2 × HEX Allen Key 1.5mm
  • 1 × Wrench 7mm&5mm
  • 1 × Cross Screwdriver 3mm
  • 22 × Socket Cap Screw M4x8-Button Head
  • 14 × Socket Cap Screw M4x14-Button Head
  • 4 × Headless Set Screw M3x5
  • 4 × Countersunk Screw M3x8
  • 3 × Nut M4
  • 1 × Nut M8

Links & Documentation


Suosittelemme myös